Insulation Materials

10 x 0.5 m x 4 mm

Content: 5 m2
moisture isolating
Covering cracks
Temperature resistance: 75 ° C
Free of solvents and CFCs, environmentally friendly
Gross density: 14 kg / m3
Adhesive consumption: approx. 250-500 g / m²

Areas of application:

smooth surface as wallpaper
Compensation of unevenness and covering of cracks
Reduction of heat loss by up to 15% (in relation to an uninsulated, 24 cm thick brick masonry)
easy and quick attachment with the styrofoam adhesive

Assembly:

Make sure the surface is clean, dry, stable and smooth and measure your wall. Cut the wallpaper to the desired length and apply the styrofoam adhesive to the wall over the entire surface with a spatula. Place the insulation wallpaper end to end in the adhesive bed and press it down with a rubber roller. You can even out the joints with cover strips or filler. Remove any glue residue with a wet cloth. After 48 hours you can use the wallpaper you want according to the manufacturer's instructions.